Product Specification

Model 4SS5/17:

-Max. Head = 106 m 

-Max. Flow = 110 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.

Product Specification

Model 4SS5/21:

-Max. Head = 131 m 

-Max. Flow = 110 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.

Product Specification

Model 4SS5/40:

-Max. Head = 249 m 

-Max. Flow = 110 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.

Product Specification

Model 4SS5/8:

-Max. Head = 50 m 

-Max. Flow = 110 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.

Product Specification

Model 4SS8/10:

-Max. Head = 59 m 

-Max. Flow = 180 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.

Product Specification

Model 4SS8/12:

-Max. Head = 70 m 

-Max. Flow = 180 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.

Product Specification

Model 4SS8/18:

-Max. Head = 105 m 

-Max. Flow = 180 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.

Product Specification

Model 4SSm3/12:

-Max. Head = 73 m 

-Max. Flow =  70 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.

Product Specification

Model 4SSm3/18:

-Max. Head = 109 m 

-Max. Flow =  70 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.

Product Specification

Model 4SSm3/22:

-Max. Head = 134 m 

-Max. Flow =  70 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.

Product Specification

Model 4SSm3/6:

-Max. Head = 37 m 

-Max. Flow =  70 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.

Product Specification

Model 4SSm5/12:

-Max. Head = 75 m 

-Max. Flow = 110 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.

Product Specification

Model 4SSm5/17:

-Max. Head = 106 m 

-Max. Flow = 110 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.

Product Specification

Model 4SSm5/8:

-Max. Head = 50 m 

-Max. Flow = 110 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.

Product Specification

Model 4SSm8/10:

-Max. Head = 59 m 

-Max. Flow = 180 L/min

Overview

The 4SS 4 inch deep well pump is a deep well water lifting tool suitable for deep groundwater extraction and can also be used for rivers, reservoirs, canals, etc. The whole machine adopts stainless steel body, 100% pure copper coil, ABS wear-resistant impeller. And it also has a thermal protector to prevent burnout of the motor. This 4SS 4 inch deep well pump is therefore wear resistant, corrosion resistant, rugged and long lasting.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with stainless steel pump head, effective against the corrosion and abrasive wear;

Installation in 4" or larger boreholes.