Special Offers
Sort by
Show result

Product Specification:

Model SGT50-250/15:

-Max. Suction = 8 m

-Max. Flow = 833 L/min

RM5,535.60
RM6,590.00

Product Specification:

Model SGT50-250/18.5:

-Max. Suction = 8 m

-Max. Flow = 917 L/min

RM6,207.60
RM7,390.00

Product Specification:

Model SGT50-250/22:

-Max. Suction = 8 m

-Max. Flow = 1000 L/min

RM8,181.60
RM9,740.00

Product Specification:

Model SGT65-125/4:

-Max. Suction = 8 m

-Max. Flow = 1033 L/min

RM2,217.60
RM2,640.00

Product Specification:

Model SGT65-125/5.5:

-Max. Suction = 8 m

-Max. Flow = 1233 L/min

RM2,461.20
RM2,930.00

Product Specification:

Model SGT65-125/7.5:

-Max. Suction = 8 m

-Max. Flow = 1417 L/min

RM2,578.80
RM3,070.00

Product Specification:

Model SGT65-160/15:

-Max. Suction = 8 m

-Max. Flow = 1417 L/min

RM5,594.40
RM6,660.00

Product Specification:

Model SGT65-160/11:

-Max. Suction = 8 m

-Max. Flow = 1233 L/min

RM4,897.20
RM5,830.00

Product Specification:

Model SGT65-200/22:

-Max. Suction = 8 m

-Max. Flow = 1417 L/min

RM8,181.60
RM9,740.00

Product Specification:

Model SGT80-160/11:

-Max. Suction = 8 m

-Max. Flow = 2167 L/min

RM5,292.00
RM6,300.00

Product Specification:

Model SGT80-160/22:

-Max. Suction = 8 m

-Max. Flow = 2667L/min

RM8,500.80
RM10,120.00

Product Specification

Model SHF20A:

-Max. Head = 19.5 m

-Max. Flow = 2150 L/min

Overview

SHF(m) centrifugal pump is designed according to the principle of centrifugal force. It has a high-speed rotating impeller blade that can drive the water to rotate and pump the water out to achieve the purpose of transportation. This centrifugal pump is a horizontal multi-stage non-self-priming multistage centrifugal pump with a long shaft motor. The compact construction allows the pump to be small in size, with an axial inlet or radial outlet. It is energy efficient, compact, and the whole is sealed and easy to maintain. The ducted installation makes it a small installation space.

These pumps are mainly used for mine drainage, industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire booster, heating, bathroom and other cold and warm water circulation pressurization and equipment support, etc., especially suitable for small boiler water supply.

 

Application Limits

Suction head up to 7m

Liquid temperature up to +40

Ambient temperature up to +40

Max. Working pressure: 3bar

Voltage fluctuation should not exceed 10% of rated value.

pH: 6.5 to 8.5

 

Features

1. The motor uses low-noise ball bearings, and its blades undergo a rigorous dynamic balance test to make the pump run smoothly.

2. Closed copper coil and electromagnetic winding design can effectively reduce motor vibration and energy consumption.

3. The net cover can be effectively protected from heat dissipation by electroplating and anti-rust treatment.

4. The advanced hydraulic model has high efficiency and a wide range of performance.

 

Basic Info.

Single-Phase 220V/50Hz

Three-Phase 380V/50Hz

Mechanical seal: Ceramic/Graphite/NBR rubber

Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running

Protection: IP44

Insulation: Class B

RM1,531.80
RM2,070.00

Product Specification

Model SHF20A:

-Max. Head = 24.5 m

-Max. Flow = 2333 L/min

Overview

SHF(m) centrifugal pump is designed according to the principle of centrifugal force. It has a high-speed rotating impeller blade that can drive the water to rotate and pump the water out to achieve the purpose of transportation. This centrifugal pump is a horizontal multi-stage non-self-priming multistage centrifugal pump with a long shaft motor. The compact construction allows the pump to be small in size, with an axial inlet or radial outlet. It is energy efficient, compact, and the whole is sealed and easy to maintain. The ducted installation makes it a small installation space.

These pumps are mainly used for mine drainage, industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire booster, heating, bathroom and other cold and warm water circulation pressurization and equipment support, etc., especially suitable for small boiler water supply.

 

Application Limits

Suction head up to 7m

Liquid temperature up to +40

Ambient temperature up to +40

Max. Working pressure: 3bar

Voltage fluctuation should not exceed 10% of rated value.

pH: 6.5 to 8.5

 

Features

1. The motor uses low-noise ball bearings, and its blades undergo a rigorous dynamic balance test to make the pump run smoothly.

2. Closed copper coil and electromagnetic winding design can effectively reduce motor vibration and energy consumption.

3. The net cover can be effectively protected from heat dissipation by electroplating and anti-rust treatment.

4. The advanced hydraulic model has high efficiency and a wide range of performance.

 

Basic Info.

Single-Phase 220V/50Hz

Three-Phase 380V/50Hz

Mechanical seal: Ceramic/Graphite/NBR rubber

Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running

Protection: IP44

Insulation: Class B

RM2,405.00
RM3,250.00

Product Specification

Model SHF5AM:

-Max. Head = 22.5 m

-Max. Flow = 500 L/min

Overview

SHF(m) centrifugal pump is designed according to the principle of centrifugal force. It has a high-speed rotating impeller blade that can drive the water to rotate and pump the water out to achieve the purpose of transportation. This centrifugal pump is a horizontal multi-stage non-self-priming multistage centrifugal pump with a long shaft motor. The compact construction allows the pump to be small in size, with an axial inlet or radial outlet. It is energy efficient, compact, and the whole is sealed and easy to maintain. The ducted installation makes it a small installation space.

These pumps are mainly used for mine drainage, industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire booster, heating, bathroom and other cold and warm water circulation pressurization and equipment support, etc., especially suitable for small boiler water supply.

 

Application Limits

Suction head up to 7m

Liquid temperature up to +40

Ambient temperature up to +40

Max. Working pressure: 3bar

Voltage fluctuation should not exceed 10% of rated value.

pH: 6.5 to 8.5

 

Features

1. The motor uses low-noise ball bearings, and its blades undergo a rigorous dynamic balance test to make the pump run smoothly.

2. Closed copper coil and electromagnetic winding design can effectively reduce motor vibration and energy consumption.

3. The net cover can be effectively protected from heat dissipation by electroplating and anti-rust treatment.

4. The advanced hydraulic model has high efficiency and a wide range of performance.

 

Basic Info.

Single-Phase 220V/50Hz

Three-Phase 380V/50Hz

Mechanical seal: Ceramic/Graphite/NBR rubber

Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running

Protection: IP44

Insulation: Class B

RM677.10
RM915.00

Product Specification

Model SHF6A:

-Max. Head = 18.5 m

-Max. Flow = 1200 L/min

Overview

SHF(m) centrifugal pump is designed according to the principle of centrifugal force. It has a high-speed rotating impeller blade that can drive the water to rotate and pump the water out to achieve the purpose of transportation. This centrifugal pump is a horizontal multi-stage non-self-priming multistage centrifugal pump with a long shaft motor. The compact construction allows the pump to be small in size, with an axial inlet or radial outlet. It is energy efficient, compact, and the whole is sealed and easy to maintain. The ducted installation makes it a small installation space.

These pumps are mainly used for mine drainage, industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire booster, heating, bathroom and other cold and warm water circulation pressurization and equipment support, etc., especially suitable for small boiler water supply.

 

Application Limits

Suction head up to 7m

Liquid temperature up to +40

Ambient temperature up to +40

Max. Working pressure: 3bar

Voltage fluctuation should not exceed 10% of rated value.

pH: 6.5 to 8.5

 

Features

1. The motor uses low-noise ball bearings, and its blades undergo a rigorous dynamic balance test to make the pump run smoothly.

2. Closed copper coil and electromagnetic winding design can effectively reduce motor vibration and energy consumption.

3. The net cover can be effectively protected from heat dissipation by electroplating and anti-rust treatment.

4. The advanced hydraulic model has high efficiency and a wide range of performance.

 

Basic Info.

Single-Phase 220V/50Hz

Three-Phase 380V/50Hz

Mechanical seal: Ceramic/Graphite/NBR rubber

Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running

Protection: IP44

Insulation: Class B

RM984.20
RM1,330.00