Special Offers
Sort by
Show result

Product Specification

Model SHF6AR:

-Max. Head = 18.5 m

-Max. Flow = 1200 L/min

Overview

SHF(m) centrifugal pump is designed according to the principle of centrifugal force. It has a high-speed rotating impeller blade that can drive the water to rotate and pump the water out to achieve the purpose of transportation. This centrifugal pump is a horizontal multi-stage non-self-priming multistage centrifugal pump with a long shaft motor. The compact construction allows the pump to be small in size, with an axial inlet or radial outlet. It is energy efficient, compact, and the whole is sealed and easy to maintain. The ducted installation makes it a small installation space.

These pumps are mainly used for mine drainage, industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire booster, heating, bathroom and other cold and warm water circulation pressurization and equipment support, etc., especially suitable for small boiler water supply.

 

Application Limits

Suction head up to 7m

Liquid temperature up to +40

Ambient temperature up to +40

Max. Working pressure: 3bar

Voltage fluctuation should not exceed 10% of rated value.

pH: 6.5 to 8.5

 

Features

1. The motor uses low-noise ball bearings, and its blades undergo a rigorous dynamic balance test to make the pump run smoothly.

2. Closed copper coil and electromagnetic winding design can effectively reduce motor vibration and energy consumption.

3. The net cover can be effectively protected from heat dissipation by electroplating and anti-rust treatment.

4. The advanced hydraulic model has high efficiency and a wide range of performance.

 

Basic Info.

Single-Phase 220V/50Hz

Three-Phase 380V/50Hz

Mechanical seal: Ceramic/Graphite/NBR rubber

Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running

Protection: IP44

Insulation: Class B

RM999.00
RM1,350.00

Product Specification

Model SHFm5AM:

-Max. Head = 22.5 m

-Max. Flow = 500 L/min

Overview

SHF(m) centrifugal pump is designed according to the principle of centrifugal force. It has a high-speed rotating impeller blade that can drive the water to rotate and pump the water out to achieve the purpose of transportation. This centrifugal pump is a horizontal multi-stage non-self-priming multistage centrifugal pump with a long shaft motor. The compact construction allows the pump to be small in size, with an axial inlet or radial outlet. It is energy efficient, compact, and the whole is sealed and easy to maintain. The ducted installation makes it a small installation space.

These pumps are mainly used for mine drainage, industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire booster, heating, bathroom and other cold and warm water circulation pressurization and equipment support, etc., especially suitable for small boiler water supply.

 

Application Limits

Suction head up to 7m

Liquid temperature up to +40

Ambient temperature up to +40

Max. Working pressure: 3bar

Voltage fluctuation should not exceed 10% of rated value.

pH: 6.5 to 8.5

 

Features

1. The motor uses low-noise ball bearings, and its blades undergo a rigorous dynamic balance test to make the pump run smoothly.

2. Closed copper coil and electromagnetic winding design can effectively reduce motor vibration and energy consumption.

3. The net cover can be effectively protected from heat dissipation by electroplating and anti-rust treatment.

4. The advanced hydraulic model has high efficiency and a wide range of performance.

 

Basic Info.

Single-Phase 220V/50Hz

Three-Phase 380V/50Hz

Mechanical seal: Ceramic/Graphite/NBR rubber

Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running

Protection: IP44

Insulation: Class B

RM666.00
RM900.00

Product Specification

Model SHFm6A:

-Max. Head = 18.5 m

-Max. Flow = 1200 L/min

Overview

SHF(m) centrifugal pump is designed according to the principle of centrifugal force. It has a high-speed rotating impeller blade that can drive the water to rotate and pump the water out to achieve the purpose of transportation. This centrifugal pump is a horizontal multi-stage non-self-priming multistage centrifugal pump with a long shaft motor. The compact construction allows the pump to be small in size, with an axial inlet or radial outlet. It is energy efficient, compact, and the whole is sealed and easy to maintain. The ducted installation makes it a small installation space.

These pumps are mainly used for mine drainage, industrial and urban water supply and drainage, high-rise building pressurized water supply, garden sprinkler irrigation, fire booster, heating, bathroom and other cold and warm water circulation pressurization and equipment support, etc., especially suitable for small boiler water supply.

 

Application Limits

Suction head up to 7m

Liquid temperature up to +40

Ambient temperature up to +40

Max. Working pressure: 3bar

Voltage fluctuation should not exceed 10% of rated value.

pH: 6.5 to 8.5

 

Features

1. The motor uses low-noise ball bearings, and its blades undergo a rigorous dynamic balance test to make the pump run smoothly.

2. Closed copper coil and electromagnetic winding design can effectively reduce motor vibration and energy consumption.

3. The net cover can be effectively protected from heat dissipation by electroplating and anti-rust treatment.

4. The advanced hydraulic model has high efficiency and a wide range of performance.

 

Basic Info.

Single-Phase 220V/50Hz

Three-Phase 380V/50Hz

Mechanical seal: Ceramic/Graphite/NBR rubber

Motor: 2 pole asynchronous motor, copper wires, built-in thermal protector, fully closed fan cooling, continuous running

Protection: IP44

Insulation: Class B

RM984.20
RM1,330.00

Product Specification

Model WQ10-10-0.75:

-Max. Head = 16 m

-Max Flow = 266 L/min

Overview

This series of WQ multi-stage submersible sewage pumps uses a new mechanical seal to efficiently transport solids and long fibers. The unique double-bladed impeller structure greatly enhances the ability of dirt to pass through, allowing it to transport sewage with solid particles. The float switch is designed to automatically control the start and stop of the pump based on the desired level change.

 

Application Limits

Maximum liquid temperature +40?

pH level from 4-10

Maximum liquid density 1.2?03 kg/m3

Voltage fluctuation range ?10%

Immersion depth from 0.5m-5m

 

Application Fields

WQ multi-stage submersible sewage pumps are used in the discharge of severely polluted wastewater from the factory, the sewage discharge station in the residential area, the drainage system of the urban sewage treatment plant, the drainage station of the civil air defense system, and the water supply device of the water supply plant. It can transport sewage and dirt with particles, as well as clean water and corrosive media.

 

Features

1. The unique double-bladed impeller structure greatly enhances the ability of dirt to pass through, allowing it to transport sewage with solid particles.

2. The float switch is designed to automatically control the start and stop of the pump based on the desired level change.

3. The automatic control cabinet can be equipped according to the user's needs to automatically protect the pump from water leakage, leakage, overload and over-temperature, which improves the safety and reliability of the product.

4.  This series of WQ multi-stage submersible sewage pumps uses a new mechanical seal to efficiently transport solids and long fibers.

RM750.50
RM950.00

Product Specification

Model WQ15-9-1.1:

-Max. Head = 14 m

-Max Flow = 400 L/min

Overview

This series of WQ multi-stage submersible sewage pumps uses a new mechanical seal to efficiently transport solids and long fibers. The unique double-bladed impeller structure greatly enhances the ability of dirt to pass through, allowing it to transport sewage with solid particles. The float switch is designed to automatically control the start and stop of the pump based on the desired level change.

 

Application Limits

Maximum liquid temperature +40?

pH level from 4-10

Maximum liquid density 1.2?03 kg/m3

Voltage fluctuation range ?10%

Immersion depth from 0.5m-5m

 

Application Fields

WQ multi-stage submersible sewage pumps are used in the discharge of severely polluted wastewater from the factory, the sewage discharge station in the residential area, the drainage system of the urban sewage treatment plant, the drainage station of the civil air defense system, and the water supply device of the water supply plant. It can transport sewage and dirt with particles, as well as clean water and corrosive media.

 

Features

1. The unique double-bladed impeller structure greatly enhances the ability of dirt to pass through, allowing it to transport sewage with solid particles.

2. The float switch is designed to automatically control the start and stop of the pump based on the desired level change.

3. The automatic control cabinet can be equipped according to the user's needs to automatically protect the pump from water leakage, leakage, overload and over-temperature, which improves the safety and reliability of the product.

4.  This series of WQ multi-stage submersible sewage pumps uses a new mechanical seal to efficiently transport solids and long fibers.

RM884.80
RM1,120.00

Product Specification

Model WQ18-15-1.5:

-Max. Head = 20 m

-Max Flow = 700 L/min

Overview

This series of WQ multi-stage submersible sewage pumps uses a new mechanical seal to efficiently transport solids and long fibers. The unique double-bladed impeller structure greatly enhances the ability of dirt to pass through, allowing it to transport sewage with solid particles. The float switch is designed to automatically control the start and stop of the pump based on the desired level change.

 

Application Limits

Maximum liquid temperature +40?

pH level from 4-10

Maximum liquid density 1.2?03 kg/m3

Voltage fluctuation range ?10%

Immersion depth from 0.5m-5m

 

Application Fields

WQ multi-stage submersible sewage pumps are used in the discharge of severely polluted wastewater from the factory, the sewage discharge station in the residential area, the drainage system of the urban sewage treatment plant, the drainage station of the civil air defense system, and the water supply device of the water supply plant. It can transport sewage and dirt with particles, as well as clean water and corrosive media.

 

Features

1. The unique double-bladed impeller structure greatly enhances the ability of dirt to pass through, allowing it to transport sewage with solid particles.

2. The float switch is designed to automatically control the start and stop of the pump based on the desired level change.

3. The automatic control cabinet can be equipped according to the user's needs to automatically protect the pump from water leakage, leakage, overload and over-temperature, which improves the safety and reliability of the product.

4.  This series of WQ multi-stage submersible sewage pumps uses a new mechanical seal to efficiently transport solids and long fibers.

RM1,090.20
RM1,380.00

Product Specification

Model WQ25-7-1.5:

-Max. Head = 14 m

-Max Flow = 633 L/min

Overview

This series of WQ multi-stage submersible sewage pumps uses a new mechanical seal to efficiently transport solids and long fibers. The unique double-bladed impeller structure greatly enhances the ability of dirt to pass through, allowing it to transport sewage with solid particles. The float switch is designed to automatically control the start and stop of the pump based on the desired level change.

 

Application Limits

Maximum liquid temperature +40?

pH level from 4-10

Maximum liquid density 1.2?03 kg/m3

Voltage fluctuation range ?10%

Immersion depth from 0.5m-5m

 

Application Fields

WQ multi-stage submersible sewage pumps are used in the discharge of severely polluted wastewater from the factory, the sewage discharge station in the residential area, the drainage system of the urban sewage treatment plant, the drainage station of the civil air defense system, and the water supply device of the water supply plant. It can transport sewage and dirt with particles, as well as clean water and corrosive media.

 

Features

1. The unique double-bladed impeller structure greatly enhances the ability of dirt to pass through, allowing it to transport sewage with solid particles.

2. The float switch is designed to automatically control the start and stop of the pump based on the desired level change.

3. The automatic control cabinet can be equipped according to the user's needs to automatically protect the pump from water leakage, leakage, overload and over-temperature, which improves the safety and reliability of the product.

4.  This series of WQ multi-stage submersible sewage pumps uses a new mechanical seal to efficiently transport solids and long fibers.

RM1,106.00
RM1,400.00

Product Specification

Model WQ6-16-0.75:

-Max. Head = 18 m

-Max Flow = 367 L/min

Overview

This series of WQ multi-stage submersible sewage pumps uses a new mechanical seal to efficiently transport solids and long fibers. The unique double-bladed impeller structure greatly enhances the ability of dirt to pass through, allowing it to transport sewage with solid particles. The float switch is designed to automatically control the start and stop of the pump based on the desired level change.

 

Application Limits

Maximum liquid temperature +40?

pH level from 4-10

Maximum liquid density 1.2?03 kg/m3

Voltage fluctuation range ?10%

Immersion depth from 0.5m-5m

 

Application Fields

WQ multi-stage submersible sewage pumps are used in the discharge of severely polluted wastewater from the factory, the sewage discharge station in the residential area, the drainage system of the urban sewage treatment plant, the drainage station of the civil air defense system, and the water supply device of the water supply plant. It can transport sewage and dirt with particles, as well as clean water and corrosive media.

 

Features

1. The unique double-bladed impeller structure greatly enhances the ability of dirt to pass through, allowing it to transport sewage with solid particles.

2. The float switch is designed to automatically control the start and stop of the pump based on the desired level change.

3. The automatic control cabinet can be equipped according to the user's needs to automatically protect the pump from water leakage, leakage, overload and over-temperature, which improves the safety and reliability of the product.

4.  This series of WQ multi-stage submersible sewage pumps uses a new mechanical seal to efficiently transport solids and long fibers.

RM632.00
RM800.00

Product Specification

Model WQ7-15-1.1:

-Max. Head = 18 m

-Max Flow = 367 L/min

Overview

This series of WQ multi-stage submersible sewage pumps uses a new mechanical seal to efficiently transport solids and long fibers. The unique double-bladed impeller structure greatly enhances the ability of dirt to pass through, allowing it to transport sewage with solid particles. The float switch is designed to automatically control the start and stop of the pump based on the desired level change.

 

Application Limits

Maximum liquid temperature +40?

pH level from 4-10

Maximum liquid density 1.2?03 kg/m3

Voltage fluctuation range ?10%

Immersion depth from 0.5m-5m

 

Application Fields

WQ multi-stage submersible sewage pumps are used in the discharge of severely polluted wastewater from the factory, the sewage discharge station in the residential area, the drainage system of the urban sewage treatment plant, the drainage station of the civil air defense system, and the water supply device of the water supply plant. It can transport sewage and dirt with particles, as well as clean water and corrosive media.

 

Features

1. The unique double-bladed impeller structure greatly enhances the ability of dirt to pass through, allowing it to transport sewage with solid particles.

2. The float switch is designed to automatically control the start and stop of the pump based on the desired level change.

3. The automatic control cabinet can be equipped according to the user's needs to automatically protect the pump from water leakage, leakage, overload and over-temperature, which improves the safety and reliability of the product.

4.  This series of WQ multi-stage submersible sewage pumps uses a new mechanical seal to efficiently transport solids and long fibers.

RM861.10
RM1,090.00

Product Specification

Model WQD10-10-0.75:

-Max. Head = 16 m

-Max. Flow = 266 L/min

Overview

WQ(D) multi-stage submersible sewage pump is designed, manufactured and inspected in strict accordance with relevant national standards. It can be used for water supply to industrial and commercial sewage, domestic sewage, urban sewage treatment plant drainage system, civil air defense system drainage station, and water supply plant.

 

Application Limits

Maximum liquid temperature +40?

pH level from 4-10

Maximum liquid density 1.2?03 kg/m3

Power frequency is 50Hz.Nominal voltage is 220VACfor single phase and 380VAC or 415VAC for three phase  with the range from -10% to 10%.

Immersion depth from 0.5m-5m

 

Application Fields

WQ(D) multi-stage submersible sewage pump is designed, manufactured and inspected in strict accordance with relevant national standards. It can be used for water supply to industrial and commercial sewage, domestic sewage, urban sewage treatment plant drainage system, civil air defense system drainage station, and water supply plant.

 

Features

It has wear-resistant whole cast iron parts design, which is durable. 

Double channel impeller, with good flow capacity, has excellent hydraulic performance.

Extended stainless steel shaft is with carbide double-sided mechanical seal, making the pump durable.

The WQ(D) multi-stage submersible sewage pump can be equipped with a control cabinet with leak detection, overheating and overload protection.

The control cabinet can be fully automatic controlled, protected and signal output, which is conducive to centralized control.

RM726.80
RM920.00

Product Specification

Model WQD15-9-1.1:

-Max. Head = 14 m

-Max. Flow = 400 L/min

Overview

WQ(D) multi-stage submersible sewage pump is designed, manufactured and inspected in strict accordance with relevant national standards. It can be used for water supply to industrial and commercial sewage, domestic sewage, urban sewage treatment plant drainage system, civil air defense system drainage station, and water supply plant.

 

Application Limits

Maximum liquid temperature +40?

pH level from 4-10

Maximum liquid density 1.2?03 kg/m3

Power frequency is 50Hz.Nominal voltage is 220VACfor single phase and 380VAC or 415VAC for three phase  with the range from -10% to 10%.

Immersion depth from 0.5m-5m

 

Application Fields

WQ(D) multi-stage submersible sewage pump is designed, manufactured and inspected in strict accordance with relevant national standards. It can be used for water supply to industrial and commercial sewage, domestic sewage, urban sewage treatment plant drainage system, civil air defense system drainage station, and water supply plant.

 

Features

It has wear-resistant whole cast iron parts design, which is durable. 

Double channel impeller, with good flow capacity, has excellent hydraulic performance.

Extended stainless steel shaft is with carbide double-sided mechanical seal, making the pump durable.

The WQ(D) multi-stage submersible sewage pump can be equipped with a control cabinet with leak detection, overheating and overload protection.

The control cabinet can be fully automatic controlled, protected and signal output, which is conducive to centralized control.

RM884.80
RM1,120.00

Product Specification

Model WQD6-12-0.55:

-Max. Head = 14 m

-Max. Flow = 266 L/min

Overview

WQ(D) multi-stage submersible sewage pump is designed, manufactured and inspected in strict accordance with relevant national standards. It can be used for water supply to industrial and commercial sewage, domestic sewage, urban sewage treatment plant drainage system, civil air defense system drainage station, and water supply plant.

 

Application Limits

Maximum liquid temperature +40?

pH level from 4-10

Maximum liquid density 1.2?03 kg/m3

Power frequency is 50Hz.Nominal voltage is 220VACfor single phase and 380VAC or 415VAC for three phase  with the range from -10% to 10%.

Immersion depth from 0.5m-5m

 

Application Fields

WQ(D) multi-stage submersible sewage pump is designed, manufactured and inspected in strict accordance with relevant national standards. It can be used for water supply to industrial and commercial sewage, domestic sewage, urban sewage treatment plant drainage system, civil air defense system drainage station, and water supply plant.

 

Features

It has wear-resistant whole cast iron parts design, which is durable. 

Double channel impeller, with good flow capacity, has excellent hydraulic performance.

Extended stainless steel shaft is with carbide double-sided mechanical seal, making the pump durable.

The WQ(D) multi-stage submersible sewage pump can be equipped with a control cabinet with leak detection, overheating and overload protection.

The control cabinet can be fully automatic controlled, protected and signal output, which is conducive to centralized control.

 

RM553.00
RM700.00

Product Specification

Model WQD6-16-0.75:

-Max. Head = 18 m

-Max. Flow = 367 L/min

Overview

WQ(D) multi-stage submersible sewage pump is designed, manufactured and inspected in strict accordance with relevant national standards. It can be used for water supply to industrial and commercial sewage, domestic sewage, urban sewage treatment plant drainage system, civil air defense system drainage station, and water supply plant.

 

Application Limits

Maximum liquid temperature +40?

pH level from 4-10

Maximum liquid density 1.2?03 kg/m3

Power frequency is 50Hz.Nominal voltage is 220VACfor single phase and 380VAC or 415VAC for three phase  with the range from -10% to 10%.

Immersion depth from 0.5m-5m

 

Application Fields

WQ(D) multi-stage submersible sewage pump is designed, manufactured and inspected in strict accordance with relevant national standards. It can be used for water supply to industrial and commercial sewage, domestic sewage, urban sewage treatment plant drainage system, civil air defense system drainage station, and water supply plant.

 

Features

It has wear-resistant whole cast iron parts design, which is durable. 

Double channel impeller, with good flow capacity, has excellent hydraulic performance.

Extended stainless steel shaft is with carbide double-sided mechanical seal, making the pump durable.

The WQ(D) multi-stage submersible sewage pump can be equipped with a control cabinet with leak detection, overheating and overload protection.

The control cabinet can be fully automatic controlled, protected and signal output, which is conducive to centralized control.

RM560.00
RM800.00

Product Specification

Model WQD7-15-1.1:

-Max. Head = 18 m

-Max. Flow = 367 L/min

Overview

WQ(D) multi-stage submersible sewage pump is designed, manufactured and inspected in strict accordance with relevant national standards. It can be used for water supply to industrial and commercial sewage, domestic sewage, urban sewage treatment plant drainage system, civil air defense system drainage station, and water supply plant.

 

Application Limits

Maximum liquid temperature +40?

pH level from 4-10

Maximum liquid density 1.2?03 kg/m3

Power frequency is 50Hz.Nominal voltage is 220VACfor single phase and 380VAC or 415VAC for three phase  with the range from -10% to 10%.

Immersion depth from 0.5m-5m

 

Application Fields

WQ(D) multi-stage submersible sewage pump is designed, manufactured and inspected in strict accordance with relevant national standards. It can be used for water supply to industrial and commercial sewage, domestic sewage, urban sewage treatment plant drainage system, civil air defense system drainage station, and water supply plant.

 

Features

It has wear-resistant whole cast iron parts design, which is durable. 

Double channel impeller, with good flow capacity, has excellent hydraulic performance.

Extended stainless steel shaft is with carbide double-sided mechanical seal, making the pump durable.

The WQ(D) multi-stage submersible sewage pump can be equipped with a control cabinet with leak detection, overheating and overload protection.

The control cabinet can be fully automatic controlled, protected and signal output, which is conducive to centralized control.

RM861.10
RM1,090.00

Product Specification

Model WVS75:

-Max. Head = 12 m

-Max Flow = 350 L/min

Overview

WVSD stainless steel submersible sewage pump adopts double-channel series mechanical seal. The material is hard and corrosion-resistant tungsten carbide, durable and wear-resistant, which can make the pump run safely and continuously. This pump adopts large-flow anti-blocking hydraulic component design, which greatly improves the ability of dirt to pass, and can effectively pass 5 times of fiber material of pump diameter and solid particles with diameter of about 50% of pump diameter.

 

Application Limits

Maximum liquid temperature +40?

pH level from 4-10

Maximum liquid density 1.2?03 kg/m3

Power frequency is 50Hz. Nominal voltage is 220VAC for single-phase and 380VAC with tolerance of ?0%.

Immersion depth from 0.5m-5m

 

Application Fields

WVSD stainless steel submersible sewage pump can be used in sewage treatment of buildings, marble plants, mud, quicksand, mud ponds, sewage ponds, loading and suspended materials.

 

Features

1. This pump adopts large-flow anti-blocking hydraulic component design, which greatly improves the ability of dirt to pass, and can effectively pass 5 times of fiber material of pump diameter and solid particles with diameter of about 50% of pump diameter.

2. Its design is reasonable and the efficiency of the motor is high, so the energy saving effect is remarkable.

3. WVSD stainless steel submersible sewage pump adopts double-channel series mechanical seal. The material is hard and corrosion-resistant tungsten carbide, durable and wear-resistant, which can make the pump run safely and continuously.

4. Stainless steel casing and rod bolts are beautiful, durable and stable.

RM679.40
RM860.00