Special Offers
Sort by
Show result

Product Specification

Model BWJ2-3:

-Max. Head = 28 m

-Max. Flow = 58 L/min

RM714.10
RM965.00

Product Specification

Model BWJ2-4:

-Max. Head = 36 m

-Max. Flow = 58 L/min

RM751.10
RM1,015.00

Product Specification

Model BWJ2-5:

-Max. Head = 46 m

-Max. Flow = 58 L/min

Overview Of The Product

BW, BWJ(T) stainless steel Horizontal Multi-Stage Centrifugal Pumps are non-self priming pumps absorbing the advanced technology from home and abroad. They are classified into two kinds: cylinder type and sectional type. They adopt horizontal motor and alloy mechanical seal, which makes the replacement more convenient. The overflowing part of the pump is made of stainless steel 304, applicable for light-corrosion medium. Relying on the high efficiency, energy saving performance, reliable quality, wide usable range, our products receive the great popularity after being launched.

 

Application Limits

Temperature range of medium: Normal type 0~+68?, hot water type 0~+120?

Maximum ambient temperature: +40 ?

Maximum working pressure: 10 bar

When the density or viscosity of the transmission medium exceeds that of water, it is necessaryto select a drving motor of high-power.

pH: 6.5 to 8.5

 

Applications Fields

Air conditioner system

Aquaculture

Cooling System

Industrial cleansing

Environmental application

Water processing(Water purification)

Fertilization/measuring system

Other special applications

RM991.60
RM1,340.00

Product Specification

Model BWJ2-6:

-Max. Head = 54 m

-Max. Flow = 58 L/min

Overview Of The Product

BW, BWJ(T) stainless steel Horizontal Multi-Stage Centrifugal Pumps are non-self priming pumps absorbing the advanced technology from home and abroad. They are classified into two kinds: cylinder type and sectional type. They adopt horizontal motor and alloy mechanical seal, which makes the replacement more convenient. The overflowing part of the pump is made of stainless steel 304, applicable for light-corrosion medium. Relying on the high efficiency, energy saving performance, reliable quality, wide usable range, our products receive the great popularity after being launched.

 

Application Limits

Temperature range of medium: Normal type 0~+68?, hot water type 0~+120?

Maximum ambient temperature: +40 ?

Maximum working pressure: 10 bar

When the density or viscosity of the transmission medium exceeds that of water, it is necessaryto select a drving motor of high-power.

pH: 6.5 to 8.5

Applications Fields

Air conditioner system

Aquaculture

Cooling System

Industrial cleansing

Environmental application

Water processing(Water purification)

Fertilization/measuring system

Other special applications

RM1,028.60
RM1,390.00

Product Specification

Model BWJ4-4:

-Max. Head = 38 m

-Max. Flow = 116 L/min

Overview Of The Product

BW, BWJ(T) stainless steel Horizontal Multi-Stage Centrifugal Pumps are non-self priming pumps absorbing the advanced technology from home and abroad. They are classified into two kinds: cylinder type and sectional type. They adopt horizontal motor and alloy mechanical seal, which makes the replacement more convenient. The overflowing part of the pump is made of stainless steel 304, applicable for light-corrosion medium. Relying on the high efficiency, energy saving performance, reliable quality, wide usable range, our products receive the great popularity after being launched.

 

Application Limits

Temperature range of medium: Normal type 0~+68?, hot water type 0~+120?

Maximum ambient temperature: +40 ?

Maximum working pressure: 10 bar

When the density or viscosity of the transmission medium exceeds that of water, it is necessaryto select a drving motor of high-power.

pH: 6.5 to 8.5

 

Applications Fields

Air conditioner system

Aquaculture

Cooling System

Industrial cleansing

Environmental application

Water processing(Water purification)

Fertilization/measuring system

Other special applications

RM947.20
RM1,280.00

Product Specification

Model BWJ4-5:

-Max. Head = 47 m

-Max. Flow = 116 L/min

Overview Of The Product

BW, BWJ(T) stainless steel Horizontal Multi-Stage Centrifugal Pumps are non-self priming pumps absorbing the advanced technology from home and abroad. They are classified into two kinds: cylinder type and sectional type. They adopt horizontal motor and alloy mechanical seal, which makes the replacement more convenient. The overflowing part of the pump is made of stainless steel 304, applicable for light-corrosion medium. Relying on the high efficiency, energy saving performance, reliable quality, wide usable range, our products receive the great popularity after being launched.

 

Application Limits

Temperature range of medium: Normal type 0~+68?, hot water type 0~+120?

Maximum ambient temperature: +40 ?

Maximum working pressure: 10 bar

When the density or viscosity of the transmission medium exceeds that of water, it is necessaryto select a drving motor of high-power.

pH: 6.5 to 8.5

 

Applications Fields

Air conditioner system

Aquaculture

Cooling System

Industrial cleansing

Environmental application

Water processing(Water purification)

Fertilization/measuring system

Other special applications

RM1,169.20
RM1,580.00

Product Specification

Model BWJT8-5:

-Max. Head = 51 m

-Max. Flow = 183 L/min

Overview Of The Product

BW, BWJ(T) stainless steel Horizontal Multi-Stage Centrifugal Pumps are non-self priming pumps absorbing the advanced technology from home and abroad. They are classified into two kinds: cylinder type and sectional type. They adopt horizontal motor and alloy mechanical seal, which makes the replacement more convenient. The overflowing part of the pump is made of stainless steel 304, applicable for light-corrosion medium. Relying on the high efficiency, energy saving performance, reliable quality, wide usable range, our products receive the great popularity after being launched.

 

Application Limits

Temperature range of medium: Normal type 0~+68?, hot water type 0~+120?

Maximum ambient temperature: +40 ?

Maximum working pressure: 10 bar

When the density or viscosity of the transmission medium exceeds that of water, it is necessaryto select a drving motor of high-power.

pH: 6.5 to 8.5

 

Applications Fields

Air conditioner system

Aquaculture

Cooling System

Industrial cleansing

Environmental application

Water processing(Water purification)

Fertilization/measuring system

Other special applications

RM2,072.00
RM2,800.00

Product Specification

Model 3SGm2.5/25:

-Max. Head = 104 m

-Max. Flow = 60 L/min

Overview

Our 3SG(m) 3 inch deep well pump has intelligent modular design, motor control soft start system, built-in MPPT and DSP chip, so the motor starts and runs smoothly. It sets overvoltage protection, undervoltage protection, overcurrent protection, and overload protection. In addition, it is equipped with a control switch with a capacitor, a copper outlet, and an oil-immersed motor. Its quality is stable and reliable, and it is very popular.

 

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

 

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

 

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Pump sleeve with screw thread, single stage floating impellers;

Installation in 3" or larger boreholes.

RM880.60
RM1,190.00

Product Specification

Model 4SG3/13:

-Max. Head = 96

-Max. Flow = 80 L/min

Overview

The 4SG(m) 4 inch deep well pump is a highly reliable motor for use in wells up to 4 inches in diameter or larger. The water outlet has a built-in check valve to prevent backflow sedimentation. It makes the pump start more easily, which effectively extends the life of the motor and makes 4SG(m) 4 inch deep well pump last longer.

 

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

hydrogen sulfide content up to 1.5mg/L, chlorideion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

 

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with cable with a motor plug, disassemble conveniently;

Pump sleeve with screw thread, single stage floating impellers, except 16 m3/hrs series which with integrated stage floating impellers;

Installation in 4" or larger boreholes;

RM726.80
RM920.00

Product Specification

Model 4SG3/21:

-Max. Head = 155 m

-Max. Flow = 80 L/min

Overview

The 4SG(m) 4 inch deep well pump is a highly reliable motor for use in wells up to 4 inches in diameter or larger. The water outlet has a built-in check valve to prevent backflow sedimentation. It makes the pump start more easily, which effectively extends the life of the motor and makes 4SG(m) 4 inch deep well pump last longer.

 

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

hydrogen sulfide content up to 1.5mg/L, chlorideion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

 

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with cable with a motor plug, disassemble conveniently;

Pump sleeve with screw thread, single stage floating impellers, except 16 m3/hrs series which with integrated stage floating impellers;

Installation in 4" or larger boreholes;

RM995.40
RM1,260.00

Product Specification

Model 4SG3/30:

-Max. Head = 225 m

-Max. Flow = 80 L/min

Overview

The 4SG(m) 4 inch deep well pump is a highly reliable motor for use in wells up to 4 inches in diameter or larger. The water outlet has a built-in check valve to prevent backflow sedimentation. It makes the pump start more easily, which effectively extends the life of the motor and makes 4SG(m) 4 inch deep well pump last longer.

 

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

hydrogen sulfide content up to 1.5mg/L, chlorideion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

 

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with cable with a motor plug, disassemble conveniently;

Pump sleeve with screw thread, single stage floating impellers, except 16 m3/hrs series which with integrated stage floating impellers;

Installation in 4" or larger boreholes;

RM1,185.00
RM1,500.00

Product Specification

Model 4SG3/50:

-Max. Head = 369 m

-Max. Flow = 80 L/min

Overview

The 4SG(m) 4 inch deep well pump is a highly reliable motor for use in wells up to 4 inches in diameter or larger. The water outlet has a built-in check valve to prevent backflow sedimentation. It makes the pump start more easily, which effectively extends the life of the motor and makes 4SG(m) 4 inch deep well pump last longer.

 

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

hydrogen sulfide content up to 1.5mg/L, chlorideion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

 

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with cable with a motor plug, disassemble conveniently;

Pump sleeve with screw thread, single stage floating impellers, except 16 m3/hrs series which with integrated stage floating impellers;

Installation in 4" or larger boreholes;

RM1,848.60
RM2,340.00

Product Specification

Model 4SG6/11:

-Max. Head = 72 m

-Max. Flow = 140 L/min

Overview

The 4SG(m) 4 inch deep well pump is a highly reliable motor for use in wells up to 4 inches in diameter or larger. The water outlet has a built-in check valve to prevent backflow sedimentation. It makes the pump start more easily, which effectively extends the life of the motor and makes 4SG(m) 4 inch deep well pump last longer.

 

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

hydrogen sulfide content up to 1.5mg/L, chlorideion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

 

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with cable with a motor plug, disassemble conveniently;

Pump sleeve with screw thread, single stage floating impellers, except 16 m3/hrs series which with integrated stage floating impellers;

Installation in 4" or larger boreholes;

RM884.80
RM1,120.00

Product Specification

Model 4SG6/14:

-Max. Head = 92 m

-Max. Flow = 140 L/min

Overview

The 4SG(m) 4 inch deep well pump is a highly reliable motor for use in wells up to 4 inches in diameter or larger. The water outlet has a built-in check valve to prevent backflow sedimentation. It makes the pump start more easily, which effectively extends the life of the motor and makes 4SG(m) 4 inch deep well pump last longer.

 

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

hydrogen sulfide content up to 1.5mg/L, chlorideion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

 

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with cable with a motor plug, disassemble conveniently;

Pump sleeve with screw thread, single stage floating impellers, except 16 m3/hrs series which with integrated stage floating impellers;

Installation in 4" or larger boreholes;

RM995.40
RM1,260.00

Product Specification

Model 4SG6/20:

-Max. Head = 133 m

-Max. Flow = 140 L/min

Overview

The 4SG(m) 4 inch deep well pump is a highly reliable motor for use in wells up to 4 inches in diameter or larger. The water outlet has a built-in check valve to prevent backflow sedimentation. It makes the pump start more easily, which effectively extends the life of the motor and makes 4SG(m) 4 inch deep well pump last longer.

 

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

hydrogen sulfide content up to 1.5mg/L, chlorideion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

 

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Available with cable with a motor plug, disassemble conveniently;

Pump sleeve with screw thread, single stage floating impellers, except 16 m3/hrs series which with integrated stage floating impellers;

Installation in 4" or larger boreholes;

RM1,177.10
RM1,490.00