|
Voltage |
110-240 V |
|
Frequency |
50-60 Hz |
|
Power |
600 W |
|
No load speed |
500-3000 rpm |
|
Max cutting depth in steel |
8 mm |
|
Max cutting depth in wood |
65 mm |
|
N.W/G.W |
21/23.8 kg |
|
Includes |
1pc hex wrench, 1pc dust adapter, 1pc saw blade |
|
Voltage |
110-240 V |
|
Frequency |
50-60 Hz |
|
Power |
650 W |
|
No load speed |
16000 rpm |
|
Max. planing width |
0-82 mm |
|
Max. planing depth |
0-2 mm |
|
Rabbeting depth |
0-16 mm |
|
Power |
350 W |
|
No load speed |
12000 rpm |
|
Cutting diameter |
250 mm |
|
Cutting system |
2 Lines / tap and go |
|
Voltage |
110-240 V |
|
Frequency |
50-60 Hz |
|
Power |
750 W |
|
No load speed |
11000 rpm/min |
|
Disc.Diameter |
100 mm |
|
Includes |
Spanner, hexagon spanner, side handle |
General/ New Surface
- Surface must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease and wax. (To have a better finish, rub down surface using suitable abrasive and dust off before painting Smart Wall Sealer 400S.
- Allow all surfaces to dry completely prior to painting. Avoid painting when the moisture content and alkalinity of the walls are still high. (Recommended painting specification requires the moisture content of the walls to be below 16% measured by protimeter and alkalinity of the walls to be below pH9.)
- Model：1AWZB125
- Power：0.125kw 0.17HP
- Max_Flow：1.8㎡/h
- Max_Head：24m
Waterbased masonry sealer Good quality Suitable for interior masonry surface such as brickwork, plaster, cement Theoretical coverage 9-11 m2/litre Provides good alkali and efflorescence resistance Dulux Inspire Exterior & Interior Wall Sealer is a good quality, water-based sealer
- 3 Years Warranty on Motor
- 188mm High-Speed AC Motor
- 5 ABS Blades Polymer Design
- Remote Control Function with 1.3.6 Hour(s) Timer
- Multi-Speed Control (High.Medium.Low)
- Enhances with Cut-off Safety Device
- Minimal and Modern Design
- Strong Air Flow and Quite Breeze
- FAUREX Economic Series
- Single Bowl Single Drainer Sink
- Model: FR-NH0911-S
- Item Code: FR-KS-NH-00169-ST
- Size: L820 x W420 x D210mm
- Material: Stainless Steel
- Finishing: Satin
- Install Type: Top Mount
- MODEL : HX-8200
- POWER(W) : 100W
- VOLTAGE : 220-240V
- FREQUENCY : 50HZ
- FLOW : 2500L/h
- MAX JET : 3.2M
- OUTLET DIAMETER : 24.5/20mm
- SIZE without box : 145x145x230mm