Product Specification

Model BLT90-3:

-Max. Head = 81 m

-Max. Flow = 100 m3/h

Overview Of The Product

BL(T) series stainless steel multi-stage centrifugal pump (afterwards called pump)boasts characters of high efficiency, low noise, steady operation, etc.The pump set adopts the non-self-priming vertical multi-stage structure, which makes a compact whole,its installation easy, its operation and maintenance convenient.

Application Limits

Medium temperature: normal type:0?~68?hot water type:0?~120?,

Ambient temperature:+40?,

Max ambient pressure:1.0MPa,

Advisable to use motor of higher power in case that the density or viscosity of medium is above that of water.

pH: 5 to 8

Electric Motor

Full-enclosed and ventilating two-pole standard motor

Protection class: IP55

Insulation class: F

Standard voltage Single phase 220V-50Hz   Three phase:380/400V-50Hz

Product Specification

Model BLT90-4:

-Max. Head = 110 m

-Max. Flow = 100 m3/h

Overview Of The Product

BL(T) series stainless steel multi-stage centrifugal pump (afterwards called pump)boasts characters of high efficiency, low noise, steady operation, etc.The pump set adopts the non-self-priming vertical multi-stage structure, which makes a compact whole,its installation easy, its operation and maintenance convenient.

Application Limits

Medium temperature: normal type:0?~68?hot water type:0?~120?,

Ambient temperature:+40?,

Max ambient pressure:1.0MPa,

Advisable to use motor of higher power in case that the density or viscosity of medium is above that of water.

pH: 5 to 8

Electric Motor

Full-enclosed and ventilating two-pole standard motor

Protection class: IP55

Insulation class: F

Standard voltage Single phase 220V-50Hz   Three phase:380/400V-50Hz

Product Specification

Model BWJ2-3:

-Max. Head = 28 m

-Max. Flow = 58 L/min

Product Specification

Model BWJ2-4:

-Max. Head = 36 m

-Max. Flow = 58 L/min

Product Specification

Model BWJ2-5:

-Max. Head = 46 m

-Max. Flow = 58 L/min

Overview Of The Product

BW, BWJ(T) stainless steel Horizontal Multi-Stage Centrifugal Pumps are non-self priming pumps absorbing the advanced technology from home and abroad. They are classified into two kinds: cylinder type and sectional type. They adopt horizontal motor and alloy mechanical seal, which makes the replacement more convenient. The overflowing part of the pump is made of stainless steel 304, applicable for light-corrosion medium. Relying on the high efficiency, energy saving performance, reliable quality, wide usable range, our products receive the great popularity after being launched.

Application Limits

Temperature range of medium: Normal type 0~+68?, hot water type 0~+120?

Maximum ambient temperature: +40 ?

Maximum working pressure: 10 bar

When the density or viscosity of the transmission medium exceeds that of water, it is necessaryto select a drving motor of high-power.

pH: 6.5 to 8.5

Applications Fields

Air conditioner system

Aquaculture

Cooling System

Industrial cleansing

Environmental application

Water processing(Water purification)

Fertilization/measuring system

Other special applications

Product Specification

Model BWJ2-6:

-Max. Head = 54 m

-Max. Flow = 58 L/min

Overview Of The Product

BW, BWJ(T) stainless steel Horizontal Multi-Stage Centrifugal Pumps are non-self priming pumps absorbing the advanced technology from home and abroad. They are classified into two kinds: cylinder type and sectional type. They adopt horizontal motor and alloy mechanical seal, which makes the replacement more convenient. The overflowing part of the pump is made of stainless steel 304, applicable for light-corrosion medium. Relying on the high efficiency, energy saving performance, reliable quality, wide usable range, our products receive the great popularity after being launched.

Application Limits

Temperature range of medium: Normal type 0~+68?, hot water type 0~+120?

Maximum ambient temperature: +40 ?

Maximum working pressure: 10 bar

When the density or viscosity of the transmission medium exceeds that of water, it is necessaryto select a drving motor of high-power.

pH: 6.5 to 8.5

Applications Fields

Air conditioner system

Aquaculture

Cooling System

Industrial cleansing

Environmental application

Water processing(Water purification)

Fertilization/measuring system

Other special applications

Product Specification

Model BWJ4-4:

-Max. Head = 38 m

-Max. Flow = 116 L/min

Overview Of The Product

BW, BWJ(T) stainless steel Horizontal Multi-Stage Centrifugal Pumps are non-self priming pumps absorbing the advanced technology from home and abroad. They are classified into two kinds: cylinder type and sectional type. They adopt horizontal motor and alloy mechanical seal, which makes the replacement more convenient. The overflowing part of the pump is made of stainless steel 304, applicable for light-corrosion medium. Relying on the high efficiency, energy saving performance, reliable quality, wide usable range, our products receive the great popularity after being launched.

Application Limits

Temperature range of medium: Normal type 0~+68?, hot water type 0~+120?

Maximum ambient temperature: +40 ?

Maximum working pressure: 10 bar

When the density or viscosity of the transmission medium exceeds that of water, it is necessaryto select a drving motor of high-power.

pH: 6.5 to 8.5

Applications Fields

Air conditioner system

Aquaculture

Cooling System

Industrial cleansing

Environmental application

Water processing(Water purification)

Fertilization/measuring system

Other special applications

Product Specification

Model BWJ4-5:

-Max. Head = 47 m

-Max. Flow = 116 L/min

Overview Of The Product

BW, BWJ(T) stainless steel Horizontal Multi-Stage Centrifugal Pumps are non-self priming pumps absorbing the advanced technology from home and abroad. They are classified into two kinds: cylinder type and sectional type. They adopt horizontal motor and alloy mechanical seal, which makes the replacement more convenient. The overflowing part of the pump is made of stainless steel 304, applicable for light-corrosion medium. Relying on the high efficiency, energy saving performance, reliable quality, wide usable range, our products receive the great popularity after being launched.

Application Limits

Temperature range of medium: Normal type 0~+68?, hot water type 0~+120?

Maximum ambient temperature: +40 ?

Maximum working pressure: 10 bar

When the density or viscosity of the transmission medium exceeds that of water, it is necessaryto select a drving motor of high-power.

pH: 6.5 to 8.5

Applications Fields

Air conditioner system

Aquaculture

Cooling System

Industrial cleansing

Environmental application

Water processing(Water purification)

Fertilization/measuring system

Other special applications

Product Specification

Model BWJT8-5:

-Max. Head = 51 m

-Max. Flow = 183 L/min

Overview Of The Product

BW, BWJ(T) stainless steel Horizontal Multi-Stage Centrifugal Pumps are non-self priming pumps absorbing the advanced technology from home and abroad. They are classified into two kinds: cylinder type and sectional type. They adopt horizontal motor and alloy mechanical seal, which makes the replacement more convenient. The overflowing part of the pump is made of stainless steel 304, applicable for light-corrosion medium. Relying on the high efficiency, energy saving performance, reliable quality, wide usable range, our products receive the great popularity after being launched.

Application Limits

Temperature range of medium: Normal type 0~+68?, hot water type 0~+120?

Maximum ambient temperature: +40 ?

Maximum working pressure: 10 bar

When the density or viscosity of the transmission medium exceeds that of water, it is necessaryto select a drving motor of high-power.

pH: 6.5 to 8.5

Applications Fields

Air conditioner system

Aquaculture

Cooling System

Industrial cleansing

Environmental application

Water processing(Water purification)

Fertilization/measuring system

Other special applications

Product Specification

Model 100WQ-5.5QG:

-Max. Head = 266 m 

-Max. Flow = 1500 L/min

Application limits

Maximum liquid temperature +40?

pH level from 4-10

Maximum liquid density 1.2?03kg/m3

Power frequency is 50Hz.Nominal voltage is 220VAC for single phase and 380VACfor three phase with the range from -10% to 10%.

Immersion depth from 0.5m-5m

Application Fields

Suitable for pumping domestic wastewater, drainingindustrial wastewater, digester sewage, 

aquaculture sewage, etc.

Features

The half-opening impeller of wear-resisting material QT450-10, the pump body and motor bracket are all durable for cast iron material.

With 95 cr18 (SUS440C) cutting knife which can cut up the objects.

Stainless steel shaft extension, carbide double-sides mechanical sealing. 

Product Specification

Model 1AWZB750H1:

-Max. Head = 44 m

-Max. Flow = 50 L/min

Product Specification:

Model :

- Max. Head = 50 m

- Max. Flow = 160 L/min

Product Specification

Model 3SGm2.5/10:

-Max. Head = 41 m

-Max. Flow = 60 L/min

Overview

Our 3SG(m) 3 inch deep well pump has intelligent modular design, motor control soft start system, built-in MPPT and DSP chip, so the motor starts and runs smoothly. It sets overvoltage protection, undervoltage protection, overcurrent protection, and overload protection. In addition, it is equipped with a control switch with a capacitor, a copper outlet, and an oil-immersed motor. Its quality is stable and reliable, and it is very popular.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Pump sleeve with screw thread, single stage floating impellers;

Installation in 3" or larger boreholes.

Product Specification

Model 3SGm2.5/20:

-Max. Head = 83 m

-Max. Flow = 60 L/min

Overview

Our 3SG(m) 3 inch deep well pump has intelligent modular design, motor control soft start system, built-in MPPT and DSP chip, so the motor starts and runs smoothly. It sets overvoltage protection, undervoltage protection, overcurrent protection, and overload protection. In addition, it is equipped with a control switch with a capacitor, a copper outlet, and an oil-immersed motor. Its quality is stable and reliable, and it is very popular.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Pump sleeve with screw thread, single stage floating impellers;

Installation in 3" or larger boreholes.

Product Specification

Model 3SGm2.5/25:

-Max. Head = 104 m

-Max. Flow = 60 L/min

Overview

Our 3SG(m) 3 inch deep well pump has intelligent modular design, motor control soft start system, built-in MPPT and DSP chip, so the motor starts and runs smoothly. It sets overvoltage protection, undervoltage protection, overcurrent protection, and overload protection. In addition, it is equipped with a control switch with a capacitor, a copper outlet, and an oil-immersed motor. Its quality is stable and reliable, and it is very popular.

Application Limits

Max. ambient temperature< 40?;

Sand content(in mass fraction)up to 0.01%;

Hydrogen sulfide content up to 1.5mg/L, chloride ion content up to 400mg/L;

pH 6.5 to 8.5;

Maximum: 70 m below the static water table.

Application Fields

Building/construction work/Domestic water supply;

Irrigation and Small water work;

Landscaping;

Water conservancy system;

Factory.

Features

Edible oil filled motor, stable& reliable running with pressure regulating membrane;

Single phase motor equipped with start box which built in capacitor &current mode thermal protector, convenient for replacement;

Pump sleeve with screw thread, single stage floating impellers;

Installation in 3" or larger boreholes.